3710MK2 TECHNICAL SPECIFICATIONS

Pick and Place System
Handler Throughput: 1100 DPH
Component Processing Range: 6-pin TSOC to 240-pin QFP
Laser Alignment: component range - 8-pin SOIC to 208-pin QFP
Placement Force: 60-600 grams positional control
Dimensions: length 50” (127cm), width 24” (61cm), and height 45” (114.3cm)
Weight: 400 lbs. (182kg)
Shipping Weight: 650 lbs. (295kg)
Shipping Dimensions: length 64” (162cm), width 38 in. 96cm), and height 60 in.(162cm)
Self Test: power supplies, CPUs, memory, X, Y, Z, θ motion systems, nozzle runout and height

Positioning System
X-Y Drive System: high-performance stepper motor driven precision belt
X-Y Encoder Type: linear optical scale
X-Y Axis Resolution: 0.0002” (0.0050mm)
Z Drive System: high-performance stepper motor driven lead screw
Theta Drive System: precision stepper motor-drivendirect drive assembly
Theta Axis Resolution: 0.014°
Theta Axis Repeatability: ±0.02”
Placement Accuracy: 90µ@ 4 sigmas, 67µ@ 3 sigmas

Vision System
Type: CyberOptics Laser Align system
Component location resolution: 1 micron

System Requirements
Air Pressure: 80 psi (5.56 bars)
Air Flow: 2.0 SCFM (50.1L/min)
Operational Temperature: 55° to 90° F (13°–32° C)
Relative Humidity: 30–80%
Minimum Floor Space (without tape and reel attachment): length 72” (182.9cm) and width 42” (106.6cm)
Input Line Voltage: 100-130/200-260 VAC
Input Line Frequency: 50/60 Hz
Power Consumption: 1 KVA

Programming System
Architecture: Concurrent, independent universal programmer at each site
Devices Supported: including, but not limited to Antifuse, Low Voltage, PROM, EPROM, EEPROM, Flash EEPROM, Microcontrollers, SPLD, CPLD, FPGA
Technologies Supported: TTL, CMOS, ECL, BiCMOS, Flash, EPROM, EEPROM, fuse, anti-fuse, (including FPGAs)
Included System Controller: High-Grade Industrial Pentium PC, SVGA monitor, keyboard and mouse
Calibration: automatic self-calibration
Diagnostics: pin continuity test, RAM, ROM, CPU, pin drivers, power supply, communications, cable, calibration, timing, ADC, DAC, actuator, leakage current
Memory: 512MB per site
Pin Controllers: one CPU with hardware accelerator per site
Programming Sites: 4 sites; 1 to 4 sockets per site

PIN Drivers
Quantity: 240 per site
Analog Slew rate: 0.3 to 25V/µs
Vpp Range: 0-25V
Ipp Range: 0-70mA continuous, 250mA peak
Vcc Range: 0-12V
Icc Range: 0-1A
Very low voltage: to 1.5V (Vdd)
Rise Time: 4ns
Overshoot: none
Clocks: continuously variable 1 MHz to 30 MHz
Protection: overcurrent shutdown, power failure shutdown
Independence: pin drivers and waveform generators are fully independent and concurrent on each site

Software
File Type: binary, Intel, JEDEC, Motorola, POF, straight hex, hex-space, Tekhex, Extended Tekhex, and others; automatic file type recognition
Device Commands: blank check, sum, compare, program, test, verify, secure, continuity, ID check, erase
Features: graphic display or job status, JobMaster™ control software, data editor, revision history, session logging, on-line help, device and algorithm information